Anthony Power Beams®
The Power Beam® is a superior glued laminated beam and header for use where reliable engineered wood applications are required. The 3-1/2″ and 5-1/2″ widths readily match 2×4 and 2×6 wall framing.
The Power Beam® depths also match all joist, truss, LVL, PSL, and I-joist floor or roof framing. The 7″ Power Beam® (2800F) is for longer spans and heavier loading. Depths go up to 28 7/8″. The Power Beam® uses only readily-available Southern Pine lumber, recognized through extensive testing as the strongest lumber resource available.
Anthony Power Preserved Beams
Anthony Forest Products introduces its new Anthony Power Preserved Glulam® Beams and Columns treated with Hoover Treated Wood Products Inc. Cop-Guard® formulation of Copper Naphthenate and covered by two 25-year warranties. Our popular standard 24F glulam and Power Column® is offered for shipment from Hoover’s plant in Pine Bluff, AR, Anthony’s Arkansas Laminating plant in El Dorado, AR and our Georgia Laminating plant located in Washington, GA. The glulam beam combination is our 24F V5 M1 which is balanced with no camber at 3 1/2″ & 5 1/4″ widths at IJC depths and treated for exterior above ground use only. The Power Preserved Column® is treated for ground contact use at .075 pcf which qualifies for AWPA use categories 4A, 4B and 4C in a severe deterioration zone. Standard sizes of 3 1/2″, 5 1/4″, and 6 3/4″ widths are offered in Combination #50 which is #1 dense SYP lumber.
Talk to a product specialist
7:00am - 5:00pm EST M-F
Trim & Moulding