Pound for pound, Douglas Fir is one of the best western soft woods. This wood is used in the manufacturing of more products than any other lumber species. This reliable and workable wood brings out the very best for your customer.
EasyTrim Reveals are an exterior aluminum reveal trim product used in conjunction with fiber cement, ACM, and natural wood products to clad building exteriors. It is a cost effective alternative to claddings such as: stucco / EIFS, brick, stone, and imported panel products.
Coastal Forest Products is proud to introduce a complete program of kiln-dried Western Hemlock products from Patrick Lumber Company. Founded in 1915, Patrick Lumber has a reputation for providing superior service and high quality products for the last 100 years. Together, Patrick Lumber and Coastal strive to always exceed our customers expectations.When properly finished and maintained, Western Hemlock is an ideal choice as a bevel siding.
Resysta® has been especially developed for outdoor areas. It withstands the fiercest weather conditions, like driving rain, extreme temperatures, and prolonged sun or shade exposure. It also has a very high slid resistance, making it a safe material for surfaces with heavy foot traffic. Resysta® has a high material density, so it is especially resistant to high humidity and excessively wet environments.
Western Red Cedar trim boards are available in a variety of grades and textures to complement the style you have envisioned. Clear boards have a limited number of natural characteristics and are specified when “clean”, fine appearance of the highest quality is desired.
- VERSATEX has a more compact cell structure than most other brands, leaving smoother cut edges.
- VERSATEX PVC Trim accepts paint better than other brands.
- The sun can yellow PVC trims. VERSATEX stays whiter than the others.
- The surface of VERSATEX is tested tougher, and it stands up to scuffs and dents better as well.
- VERSATEX offers a cut-to-length program to eliminate waste, and factory-packed mixed widths packaging for a wide variety of dealer needs.
- VERSATEX has patent-pending Stealth products, the trim system that hides the cut edges of all types of sidings
Weaber’s Oak, Poplar and Finger Joint Poplar Mouldings are available in a large variety of upscale profiles to fit your specific needs. Weaber’s Finger Joint Poplar Mouldings are manufactured from the same quality C & Better Poplar as our Solid Poplar Mouldings but with a potential cost savings. Weaber’s Finger Joint Mouldings are available in both primed and un-primed.
Solid wood plank paneling from Woodway is the choice of serious professionals and homeowners alike. Every single piece in our generous range of species and sizes is hand-inspected for quality. Woodway’s quality machining and attention to detail make it acceptable for interiors in the finest of homes. Clean, precision moulding – consistently. No unpleasant surprises are buried inside the package.
VERSAWRAP is another innovation from VERSATEX that is designed to save time and money during installation while improving the finished look. The unique design of VERSAWRAP features a product cut with three pre-mitered grooves that fold around the structural wood post and lock together with a friction fit joint. The pre-mitered grooves feaure an inter-locking joint design that assures proper corner alignment and greater surface area for bonding. VERSAWRAP is easy to install – peel protective tape off the corners and walk away.
VERSATEX moulding line features 28 popular profiles and are extruded, not cut, and colored matched to other VERSATEX product. These Profiles are a fantastic compliment to any VERSATEX project and like all our products require minimal maintenance and are impervious to moisture.
If you use PVC trimboard, you need the American made, EPA Green, structural adhesive system for PVC trim and moulding. Certified through comprehensive testing at every United States PVC trim and sheet manufacturer! No one else comes close!